28%
Epoxy
Outstanding chemical resistance and adhesion. The choice for interior and industrial parts; UV-sensitive, so kept indoors.
Interior · Industrial
0%
The sectors we coat for — and exactly how each one is treated, protected and finished.
Every field places different demands on a coating. Here is the system, the finish and the protection we specify for each — and why it matters.
Weatherproof finishes for the building envelope.
Aluminium façade profiles, balcony railings & balustrades, steel gates, doors, frames and cladding panels.
Super-durable polyester powder over a phosphate / chromate conversion layer — engineered for full UV and weather stability on aluminium and steel.
One 60–120 µm coat replaces primer + topcoat and stays colour-fast through years of sun, rain and pollution — façades that never need repainting.
A hard skin for the plant floor.
Machine housings and frames, electrical enclosures and control cabinets, pumps, valves, brackets, racking and storage.
Epoxy or epoxy-polyester (hybrid) powder for maximum chemical and abrasion resistance in indoor and industrial environments.
An impact-resistant film that shrugs off oils, solvents and knocks — protecting equipment and keeping it looking specified for its whole service life.
Designer looks that survive daily use.
Table and chair frames, shelving and storage, kitchen and retail fixtures, indoor and garden furniture.
Hybrid for indoor pieces and polyester for garden use — in matte, gloss, textured, hammered and metallic effects.
A tough, tactile, scratch-resistant finish in any RAL colour or special effect — furniture that looks high-end and takes daily handling and cleaning.
Built to beat rust, soil and sun.
Ploughs, seed drills and implements, trailers, silos and tanks, fencing and structural steelwork.
Super-durable polyester over a zinc-phosphate conversion layer — engineered against corrosion from soil, fertiliser and constant outdoor exposure.
Machinery that resists rust, chemicals and UV season after season — protecting a heavy investment and cutting downtime and replacement cost.
Showroom-grade, road-proof finishes.
Alloy wheels, brake calipers, chassis and suspension parts, exhaust trims and accessories.
Epoxy primer + polyester topcoat, or flexible polyurethane — for heat tolerance, stone-chip resistance and a deep, durable gloss.
Finishes that take road salt, brake heat, impact and weather without chipping or corroding — premium looks that last the life of the part.
Decades of zero-maintenance service.
Street-lighting columns, lamp posts, sign and signal poles, public-works and urban furniture.
Super-durable polyester to EN 13438 Class A — maximum architectural weatherability, including coastal and high-UV sites.
Public infrastructure that stays uniform and corrosion-free for decades with no upkeep — protecting municipal budgets in any climate.
Certified colour for windows & doors.
Aluminium window and door systems, profiles and extrusions, curtain-wall sections and partitions.
Architectural polyester powder, QUALICOAT-grade, applied over a clean pre-treatment for certified adhesion on aluminium.
Window and door systems that hold colour and seal against weather for the life of the building — certified, repeatable, full-RAL.
Any part, any colour, any finish.
One-offs and prototypes, art and décor, signage, bespoke brackets and fabrications.
The full range — epoxy, hybrid, polyester and polyurethane — with textured, hammered, metallic, glitter and custom-matched RAL effects.
Small batches and special effects handled with the same documented quality as a full production run.
We supply the full family of thermosetting powders and match the chemistry to the job.
Outstanding chemical resistance and adhesion. The choice for interior and industrial parts; UV-sensitive, so kept indoors.
The balanced all-rounder and the most widely used powder — interior and moderate exterior at an economical price.
Excellent UV and weather resistance with a wide colour range. The standard for façades, joinery and all outdoor work.
High flexibility and impact resistance with fine decorative and texture effects.
Documented, repeatable and industrial-grade — verified against international test standards.
| Standard | Test | What it verifies | Boyal reference |
|---|---|---|---|
| ISO 2409 | Cross-cut adhesion | Coating adhesion on a 0–5 scale (0 = perfect) | 0 GT |
| ISO 2815 | Buchholz hardness | Film hardness & resistance to deformation | ≥80 BH |
| ISO 1522 | Pendulum hardness | Elasticity & cure by pendulum damping | ≥60 s |
| ISO 2360 | Dry-film thickness | Coating thickness by eddy-current gauge | 60–120 µm |
| ISO 6272 | Falling-weight impact | Impact resistance of the cured film | ≥80 cm/kg |
| ISO 7253 | Salt-spray (5% NaCl) | Corrosion resistance, measured in hours | ≥500 h |
| EN 13438 | Outdoor durability | Architectural UV & weather class | Class A |
| ASTM D3359 | Tape adhesion | Rapid adhesion check | 5B |
Our powder coatings are produced and certified to recognised quality, environmental and occupational-safety standards.